The water-proof colored facade paint is based on acrylic and by using silicone additives, it has a suitable structure as a color coating of the facade of the building. It is used in the facade as a final layer and a decorative coating for external thermal insulation. It is easy and quick to implement and is waterproof and allows the surfaces to breathe. It is resistant to external factors. It is implemented on the old color of the facade and constitutes a replacement with a long life.

Facade paint is a resistant coating for beautifying the exterior of residential, office, factories, etc., which increases the life of the materials and adds to the beauty of the structure due to its waterproof and anti-erosion properties. The formulation of exterior paint is different from the interior paint. The color formulation of the outer wall of the building should be prepared according to the weather conditions of the region.

Usually, the coatings that include color are applied on fresh cement surfaces that still have carbon dioxide gas, not to mention that their cement component is very alkaline, therefore, polymer dispersions that are suitable for these colored coatings must be resistant to alkalinity and have good resistance to saponification. The lack of bond resistance against the mentioned features causes cracking, plastering, or loss of adhesion and finally reducing the lifespan of the facade. The good features of Rang Nama have made this type of exterior covering in a wide and complete range of areas with different climate characteristics, hot and dry, cold, moderate and humid, especially in big cities and industrial areas that have a large population and density and a high level of pollution. are being used.

If we want to talk about the application of facade paint, it should be said that this coating is used to protect wooden surfaces, concrete and other materials, especially in the facade of buildings, which of course also has a decorative aspect. The lining that is suggested for work is: Epoxy sealer, epoxy putty based on one-component water-based acrylic resin. It is recommended to use a layer of sealer to strengthen the paint film. Its drying mechanism: about the consumption of about 270 grams per square meter for an 80 micron thick layer of paint, surface drying for 30 minutes and partial drying for 1 hour and repainting for 8 hours will be part of the work routine. You can also use epoxy putty for sealing and leveling the surface.